Rigid inflatable boats
R85-C
Rigid inflatable boat | C-Series
RIB-C Series
A multi-purpose fast responder RIB with twin engine capacity, the RIB-C Series (available in CSM-CR) is the most versatile in its class.
It features a self-bailing deck, an under-deck cable routing and removable slide-on tubes.
Colors
CSM-CR 1670 dtx Black
CSM-CR 1670 dtx Medium grey
CSM-CR 1670 dtx Orange
Key features
- Multi-purpose Fast Responder RIB
- Twin engine capacity
- Highly customizable
- Long range autonomy (built-in fuel tank)
- Under-deck cable routing
- Self-bailing deck
- Tubes are in CSM-CR (Chlorosulfonated Polyethylene – Neoprene)
- Removable slide-on tubes
Pictures
Video
Recommended for
Technical specifications
  Dimensions
  (meters - feets/inches)
  Overall length
      8,5 - 27'11''
    Inside length
      7,45 - 24'5''
    Overall width
      3 - 9'10''
    Inside width
      1,85 - 6'1''
    Buoyancy tube diameter
      0,6 - 1'12''
    Outboard data
  Shaft
      Ultralong
    Min. recommended power (Hp)
      250
    Min. recommended power (kW)
      187
    Max. recommended power (Hp)
      300
    Max. recommended power (kW)
      223
    Max. power allowed (Hp)
      350
    Max. power allowed (kW)
      258
    Max. weight of outboard (kg - lbs)
      393 - 866
    Max. speed (km/h - mph)
      91 - 57
    Capacity
  Passengers (ISO B/C)
      8/25
    Max payload* (kg-lbs) Cat C (ISO14945)
      3250- 7165
    Max payload* (kg-lbs) Cat B (ISO14945)
      2000- 4409
    Total weight (kg - lbs)
      1450 - 3197
    Airtight compartments
      7
    Hull storage dimensions
  (meters - feets/inches)
  Length
      7,78 - 25'6''
    Width
      2,26 - 7'5''
    Height
      1,37 - 4'6''
    Hull angle
      24°
    Design category
  European directive N° 2013/53/ EU
      B/C
    Twin-engine data
  Shaft
      Extralong
    Max. power allowed (Hp)
      2x250
    Max. power allowed (kW)
      2x184
    Max. weight of outboard (kg - lbs)
      2x300 - 2x661
    * The maximum payload rating has been calculated according to ISO standard (14945). Operating at or near maximum payloads is only advised in calm water and at reduced speeds. B category maximum payload specifications may vary according to the outboard and equipment configuration, and will go through individual certification by notified body.
  Features
  Buoyancy tube
  - CSM-CR 1670 dtx fabric (Chlorosulfonated Polyethylene – Neoprene)
- Removable tube system
- Anti-skid patches
- Heavy Duty, anti-chafing, bow fender system
- Polyester internal / external Grab line
- Leafield inflation valves
- Leafield pressure relief valves
- Extra Large profile rubbing strake
- 4 external handles
- Reinforced cone ends
Hull
  - Fibreglass deep V-shaped hull
- Moulded non-skid, self-bailing deck
- Bow locker
- Stern technical compartment
- 1 Bow D-ring
- 2 Towing rings
- 4 High volume self-bailer
- 2 Stern mooring cleats
- 1 Stainless steel mooring bollard (100 mm)
Standard equipment
  - Built-in fuel tank + fuel/water separator : 400 L
- Removable bow storage box
- Electrical circuit with battery coupler and circuit breaker
- 2 Bilge pump
- 2 paddles
- Foot pump & pressure gauge
- Repair kit
- Owner’s manual
Optional accessories
  - GRP Console Large
- GRP Console XLarge
- Double stainless steel bolster
- Single stainless steel bolster
- Jockey seat
- Roll-bar
- T-TOP
- Bow rail
- Tow post (bow/stern)
- Rope guard
- Diving cylinders holder












